In show jumping, two fences can look similar from the front and ask very different questions of the horse. The vertical asks the horse to clear height. The oxer adds a second rail line behind the first, so the horse also has to clear the distance between them in a single jump. That front-to-back distance is called the spread.
The easiest way to tell the two apart is to look from the side. The vertical has its jumping elements arranged in one plane. The oxer has a front and a back, with space between them. Two obstacles can have the same top rail height and still require different efforts because the oxer adds spread.
![]()
| Feature | Vertical Jump | Oxer Jump |
| Rail arrangement | One vertical plane | Front and back rail lines |
| Main dimensions | Height | Height and front-to-back spread |
| What the horse clears | The height of the fence | The height and spread in one effort |
The height and arrangement of the front and back rails change the profile of the fence. From the side, you can distinguish an ascending oxer from a square oxer by comparing the two top rails.
Square or parallel oxer. The front and back top rails are set at the same height, creating a level profile from the side.
Ascending oxer. The back rail is higher than the front top rail, creating a rising profile in the direction of travel.
Swedish oxer. The front and back rails slope in opposite directions, creating a crossed appearance when viewed from the front.
![]()
For riding schools, equestrian centers, and show organizers, the equipment checklist starts with the two rail lines. If you already have jump standards, check the hardware they accept before ordering replacement poles, cups, or tracks.
| Component | What to check before ordering |
| Jump standards or wings | Confirm you have supports for both the front and back rail lines. |
| Jump poles | Check the pole length against the spacing between standards. Shinehope Equine offers wooden, aluminum, and plastic options. |
| Jump cups | Check how the cups fit the standard or track, and confirm the cup type required for each rail position. |
| Keyhole tracks | Check compatibility with your existing jump cups if you plan to keep using them. |
| Pole end caps | Confirm the outside diameter of your poles when ordering replacement caps. |
For FEI competition use, Article 235 requires FEI-approved safety cups to support the back pole of a spread obstacle. When ordering for an event, confirm the applicable rules with the organizer and specify the required safety cup system in your equipment list.
Is an oxer one jump or two?
It is one obstacle. The horse clears both rail lines in a single jumping effort.
What does “spread” mean on an oxer?
It means the front-to-back distance the horse must clear. The length of the pole across the face of the fence is a separate measurement.
What should I send when requesting replacement oxer components?
Send a photo of your existing jump standard and a close-up of the cup and track. Include the pole length, pole diameter, required quantities, and whether the equipment is for training or competition.
Planning a new course or replacing parts in an existing arena? Contact Shinehope Equine with your equipment list or photos of your current setup. We can help you select jump poles, cups, tracks, and end caps that fit your project.